Flat
We produce HRAP (True Mill Bars) Flat Bars as we are a fully integrated mill. We have a full quality control as the entire process is in-house and each step monitored carefully. Our flat bars are of high strength as compared to slotted flat bars. It is used in construction and for high strength applications. We produce flat bars by two ways HRAP and shot blasted and HRAP and belt polish for decorative applications
Specifications
| Packaging |
Kg Bundles or As per customer’s requirement |
| Grades |
- All 200 series, 300 Series & 400 Series
|
Cross Section
|
|
| Width |
190mm |
| Length |
6 meter or As per customer â €™s requirement |
| Size Tolerances |
ASTM A484 |
| Length |
Minimum 3.00 meters to 6.70 meters or 10 feet to 22 feet |
| Length Tolerance |
Available in special cut to length bars in tolerance -0/+50 mm
(-0/+2 inch)
|
| Straightness |
1mm/meter |
| Surface Finish |
Hot Rolled Annealed Pickled & Shot Blasted |
| Heat Treatment |
Solution Annealed |
| Size |
Thickness |
| 25 MM (1") |
5 mm to 12 mm (1/8" - 1/2") |
| 30 MM (1 -3/16") |
5 mm to 12 mm (1/8" - 1/2") |
| 32 MM (1-1/4") |
5 mm to 12 mm (1/8" - 1/2") |
| 35 MM (1-3/8") |
5 mm to 12 mm (1/8" - 1/2") |
| 40 MM ( 1-4/7") |
5 mm to 25 mm (1/8" - 1") |
| 45 MM (1-7/9") |
5 mm to 25 mm (1/8" - 1") |
| 50 MM (2") |
5 mm to 30 mm (1/8" - 1-3/16") |
| 55 MM (2-1/16") |
5 mm to 30 mm (1/8" - 1-3/16") |
| 60 MM ( 2-3/8") |
5 mm to 30 mm (1/8" - 1-3/16") |
| 65 MM ( 2-5/9") |
5 mm to 30 mm (1/8" - 1-3/16") |
| 70 MM (2-3/4") |
5 mm to 30 mm (1/8" - 1-3/16") |
| 75 MM (3") |
5 mm to 50 mm (1/8" - 2") |
| 80 MM ( 3-1/8") |
5 mm to 30 mm (1/8" - 1-3/16") |
| 90 MM (3-1/2" |
5 mm to 30 mm (1/8" - 1-3/16") |
| 100 MM (4") |
5 mm to 50 mm (1/8" - 2") |
